Dashboard Camera Android 5 1080P Dual Camera and GPS, 7 “IPS screen Bluetooth 3G / Detailed review

November 20, 2017 by  
Filed under How To Fix Your Car


Dashboard Camera Android 5 1080P Dual Camera and GPS, 7 “IPS screen Bluetooth 3G / Detailed review
Subscribe to my channel please !!! https://www.youtube.com/c/AmazingAnimals2016?sub_confirmation=1&feature=iv&src_vid=o1RpYuqIa4c&annotation_id=annotation_2178503995

Thank you all for watching and subscribe to the channel 👍
Video Rating: / 5


You will find many articles online on how to find a GPS Tracker in your car. I find it amusing that most of them have as their last step to get a professional to find it for you.
Now here is where I am going to save you money. Do Not buy a cheap Bug Detector to find a tracker. They do not work. In this day and age all trackers have movement sensors inside and do Not emit
a signal while being parked, and it is impossible for one person to sweep a vehicle with a detector while moving of course. Movement sensors usually kick in around 11 MPH so just shaking the vehicle does not work anymore. Read these words carefully. “ IF you are sweeping your vehicle with a bug/gps detector while it’s parked you’re wasting your time.”
Most trackers only transmit or update to a website every 2 minutes or less to save on battery life. So if you’re trying to scan for it, even while in motion; you may not get a reading unless you held your RF/GSM Detector in every area for more than 2 minutes at a time. Believe me, No one is that thorough. Nor has that amount of patience.
You might as well have a Spy Geek help you. People who try finding trackers themselves often get more frustrated and spend more money than if they would have just called us to begin with.
You must have a trained Spy Geek do a physical inspection with the car parked first. Then a rolling RF/GSM/GPS Sweep second. This is the only way my friends..

The physical inspection can take a while depending on how many accessible areas someone could hide a GPS/Bug in your particular vehicle; and whether or not that suspect has inside access. Remember whoever may be tracking you has to retrieve this device to either charge it or remove it after done with it. So it’s not going to be in an inaccessible area. Many times a Tracker can be found just by laying down with a flash light in your garage and looking underneath your vehicle for anything in a small black magnetic box. It will not look like part of the vehicle on the outside. Now inside the vehicle the most common areas to place a GPS Tracker is into the OBD Port under the driver’s side dash, usually near your fuse box. Just google your make and model of vehicle and “OBD Port” there will be a diagram where yours is. Having physical access to your car means your stalker could have wired a tracker to the battery under your hood. Being the oldest method and unlikely. However doing a good car sweep should also include checking for any non-stock wires connected to your vehicles 12 volt battery leading to the tracker itself.

Hint: The reason the Physical Inspection is so important. Many Passive GPS Trackers (Like the little Hockey Puck one at the start of the video) never emit any signal that can be measured by a RF Detector. They must be retrieved and played back.

The Little Black Square Vehicle Tracker we sell in the video can be hypothetically placed anywhere inside with Velcro under your dash and be quite hard to find to the untrained eye. With limited access the person tracking you will have to magnetically place their tracker on the outside of your vehicle within arm’s reach, to be sure they can retrieve it to charge the battery. So limiting who has physical access to your vehicle will make it easier to find a tracker on the outside. It’s checking every nook and cranny on the inside on your vehicle that takes the most time.
It would be wise to remember that all GPS needs a way to get a signal to the satellite or cell phone tower. So it will not work in places where you lose all your signal strength on your own cell phone.
Example: Under your car seat is a big metal plate that usually blocks most GPS signals. The easiest way to tell where a tracker will Not be is just slowly scan around your car with your cell phone looking at your signal strength bar and when it fades to nothing, Stop and note that a tracker will not work here. Then scan around more until you find all the dead zones in your vehicle. By process of elimination you will now know all the areas in your car that a tracker will never work. From my personal experience I find most trackers somewhere deep hidden underneath the dash area; either attached by double stick tape or Velcro. Again while down there check your OBD Port. All these areas near and around the front dash board of any vehicle GPS/Cell phone signals always work.
Then underneath any vehicle GPS signals can bounce off the pavement to reach the sky. Be diligent about checking all these areas first in your Car Sweep for GPS Trackers.

If you do everything stated above you will be doing as good as us in checking your vehicle for any surreptitious GPS or Bugging devices. Now if you find something. Do Not Touch it. Get gloves and take photos of it then call the police or a trusted private investigator for removal so they can take prints off of it.

Disclaimer: It is illegal to track a vehicle that is not yours. Simple.
Email us at spygeeks@gmail.com
Call 407-579-0114
Video Rating: / 5

Scanner de auto OBDII Bluetooth para Android

March 29, 2017 by  
Filed under How To Fix Your Car

Pedidos a contacto@androidmx.net

Android México: http://androidmx.net
Twitter: @AndroidMX
Video Rating: / 5

Project – Bluetooth Arduino Android Car

March 24, 2017 by  
Filed under How To Fix Your Car


Project - Bluetooth Arduino Android Car

The CAR has been modified to be controlled by an Arduino UNO R3 and the communication is done through a HC-05 module connected to an Android smartphone.

– Arduino UNO R3
– Bluetooth module (HC-05)
– DC motors controlled with H-bridge
– 6 LED`s (2 front lights, 2 back lights, 2 turning lights)
– 5xAA battery, 9V battery
– Android aplication made with MIT App Inventor

Video Rating: / 5


I tested this OBD II adapter on my car and it worked very well!
Applications used: OBD Car Doctor and ObdElm327 (shown at the end)

Mini ELM327 V1.5 OBD2 II Bluetooth Diagnostic Car Auto Interface Scanner HE
Mini ELM 327
1. Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim
2. Display current sensor data, including: Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure etc.
Clear trouble codes and turn off the MIL (“Check Engine” light)
Compatible Makes: Chrysler Ford Honda Mazda Nissan Toyota VW & More
Compatible Phones: Android Smartphones
Compatible Software: Easy OBD-II, ScanMaster ELM, wOBD Crazy and More
Processor: ELM327 V1.5
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
Supported Software Compatible for Windows, OSX, Palm, Pocket-PC, Linux, Android, DOS, and Windows Smartphone
Supports all OBD-II Protocols (ISO15765-4 (CAN), ISO14230-4 (KWP2000), ISO9141-2, J1850 VPW, J1850 PWM)
Works with Android Torque (Suggested)
Works with OBD-II Complaint Vehicles
-Vehicle Coverage:
–Chrysler 1996 ~ Current Year (OBD-II)
–Ford 1996 ~ Current Year (OBD-II)
–GM 1996 ~ Current Year (OBD-II)
–Honda 1996 ~ Current Year (OBD-II)
–NISSAN 1996 ~ Current Year (OBD-II)
–Toyota 1996 ~ Current Year (OBD-II)
–All other Asian and European1996 – Current Year (OBD-II )
– Suitable For:
–Alfa Romeo–Audi–Bentley–BMW–Chevrolet–Chrysler–Citroen–Corvette–Daewoo–Daihatsu–Datsun–Dodge–Ferrari–Fiat–Ford–Honda–Hyundai–Isuzu–Jaguar–Jeep–Kia–Lada–Lamborghini–Lancia–Land Rover–Lexus–Lotus–Mazda–Saturn–Mercedes-Benz–MG–Mini–Mitsubishi–Nissan–Peugeot–Porsche–Proton–Renault–Rover–Saab –Seat–Skoda–Smart–Ssangyong–Subaru–Suzuki–Toyota–Vauxhall/ Opel–Volkswagen–Volvo

Dimensions: about 4.7 * 2.5 * 3.1cm
Net weight:31g
Package weight:41g

Package includes:
1 x ELM327 Bluetooth OBD2 Scanner Tool
1 x CD Drive
Video Rating: / 5

Launch X431 iDiag Auto Diag Scanner for Android, iPad obd2 diagnostic tool

June 23, 2016 by  
Filed under How To Fix Your Car

X431 iDiag based on internet and mobile terminals. http://www.autointhebox.com/launch-x431-idiag-auto-diag-scanner-for-android_p2785.html It is a new vehile trouble diagnose device developed by Launch with over 20 years R & D experience in vehicle diagnosis. Though the bluetooth communication between vehicle diagnostic connector and variant mobile intelligent terminals, it achieves X431 series full car model and full system vehicle trouble diagnosis, which include reading DTCs, clearing DTCs, reading vehicle data stream, actuation test and special functions.

Appointed Autel Authorized Online Dealers: Autointhebox.com
http://www.autointhebox.com Launch X431 iDiag On$ .99

X431 iDiag Auto Diag Scanner supported function:

1. Vehicle full system diagnosis
2. Reading DTCs and Clearing DTCs
3. Reading system version information
4. Data stream dispalyed in curves
5. Reading data stream information
6. Actuation Test
7. Special function
8. Instant information and software upgrade reminding
9. Maintenance community to share technical experience
10. Maintenance data base contains maintenance data and maintenance case online shareing
11. Strong data base support and online service supply
X431 iDiag Auto Diag Scanner parameter

1. Connection method: Standard OBDII interface, micro USB2.0
2. Typical Power Consumption:(12V) Static current 25mA,overall unit average current 35mA
3. Working temp: -20℃-55℃
4. Storage temp:-30℃-70℃
5. Dimension: L*W*H=48mm*24mm*32mm
6. Unit weight:26g
7. Working voltage: powered by vehicle battery DC 9V-15V

X431 iDiag Auto Diag Scanner software price:

each one car model 66USD
American cars software package:289USD
Asian cars: 499USD
European cars software package: 599USD

Package including:

1pc x X431 iDiag Auto Diag Scanner main unit
1pc x OBD2 Cable
1pc x Password paper
1pc x Carrying case

iDiag should be connected with iPad or iPhone
External packing reveal the install steps
Quick Start Guide
Accessories included:
The password letters, iPad Leather Case, OBD interface extension cord
Install the Ipad leather case
Open the Wifi of the iPad, enable it surf the Internet
Input the X431 in APP Store searching box to search the idiag Internet applications
Download the X431 iDiag software
Open the X431 iDiag software
Read the Announcement
Sign up for the first time
Fill in the Personal information
Video Rating: / 5

ELM 327 OBD2 WiFi/Bluetooth Scanner Review for iPhone and Android

December 3, 2015 by  
Filed under How To Fix Your Car

Whats going on guys. happy to bring you this review of my new ELM327 ODBII port diagnostics scanner. Recently purchased this off of ebay for about bucks. In this video I will show you how to clear codes check on important data like boost and air fuel ratios, along with how to do a rolling DYNO run with your laptop. Compatable with Iphone, Ipad (WiFi) and all phones incl’ Samsung running android OS (Bluetooth)


Learn the basics of controlling objects with your Smartphone through Bluetooth!

You can find the code and parts used in this video at the link below:

Special thanks to Tolik777 for providing the code and the Android app:

Arduino Bluetooth Basics:

Help support my channel:

Get social!
Video Rating: / 5

Next Page »